*** STOCKS EXPECTED EARLY APRIL 2020 ***

CIDEX® OPA Solution is a convenient, ready-to-use, high-level disinfectant that provides a broad spectrum of kill.

It is trusted by hospitals all the world over for providing rapid, cost-effective high-level disinfection for a wide range of endoscopes and other healthcare instruments.

Glutaraldehyde-free (0.55% ortho-phthalaldehyde) high-level disinfecting solution. Rapid 5-minute soak time at 25°C in an automated endoscope reprocessor. Twelve-minute soak time 20°C for manual reprocessing.

MetriCide 28 is a long-life, 2.5% buffered glutaraldehyde that can be used and reused as a sterilant and high-level disinfectant for up to 28 days.

MetriCide 28 must maintain the minimum effective concentration (MEC) level of 1.8% glutaraldehyde or greater during the 28-day use life to effectively sterilize and high-level disinfect. It is recommended to test the glutaraldehyde solution prior to each use to help prevent healthcare-associated infections (HAIs).

MetriCide Plus 30 is a long-life, 3.4% buffered glutaraldehyde. It is the extra-strength solution for sterilization and disinfection of immersible medical equipment and instruments.

MetriCide Plus 30 must maintain the minimum effective concentration (MEC) level of 1.8% glutaraldehyde or greater during the 28-day use life to effectively sterilize and high-level disinfect. It is recommended to test the glutaraldehyde solution prior to each use to help prevent healthcare-associated infections (HAIs).

Sterilant and High Level Disinfectant formulated with AHP Accelerated Hydrogen Peroxide

• 20-minute steriliant and high level disinfectant for for reprocessing heat sensitive semi-critical and critical devices for which heat sterilization is not suitable. 
• The oxidation action of Hydrogen Peroxide provides added confidence that bio-burden potentially left behind during cleaning will not affix to surfaces
• As a Ready to Use solution, there is no need to mix prior to use or add an activator
• Requires no special ventilation;  It is a more responsible solution for disinfection without the use of harmful chemicals
• The active ingredient, Hydrogen Peroxide, breaks down into water and oxygen, reducing environmental impact.
• May be reused for up to 14 days
• Use with AHP72 test strips

A high level disinfectant and sterilant for processing heat sensitive semi-critical and critical medical devices and instruments for which heat sterilization is not suitable. The exceptional safety profile means there is no special ventilation required. PREempt HLD5’s active Hydrogen Peroxide is environmentally preferable (breaks down into water and oxygen, leaving  no active ingredient residue).

5-minute high level disinfection 14-day reusable solution

• Designed for use on heat sensitive semi-critical & critical devices.
• Virucidal: 5 Min., Poliovirus, Sabin strain type 1, which allows for a Broad-Spectrum Virucide claim against most enveloped and non-enveloped viruses
• Bactericidal: 5 Min.
• Fungicidal: 5 Min.
• Tuberculocidal: 5 Min
• Sporicidal: 6 Hrs. • Bacillus subtilis • Clostridium sporogenes 
• Test Strips Available (AHP2) 

Resert High Level Disinfectant - Chemosterilant is a RTU reusable high level disinfectant for processing heat sensitive, semi-critical medical devices. Resert HLD is an oxidative chemistry, using 2% Accelerated Hydrogen Peroxide (AHP), eliminating staff and patient exposure hazards associated with aldehyde-based HLD solutions.

• Kills HPV virus. 
• No extra ventilation required • Leaves no toxic residues on devices • No patient contraindications, contact dermatitis or respiratory distress
• One rinse, saving time and water • 5-minute contact time • Re-useable for up to 14 days
• Formulated with biodegradable ingredients • Requires no detoxification – pours safely down the drain • Single rinse requires less water than other high-level disinfectants • No heating required for activation